T : Time of vacuuming
The machine is operated by the preset time for vacuuming. When you select 25, the vacuum works for 2.5 second and the
nozzle moves backward after that.
This button decides the type of work among the following process.
(2) Vacuum → Sealing
(3) Gas flushing → Sealing
(4) Vacuum → Gas flushing → Sealing
(5) Gas flushing → Vacuum → Sealing
(6) Vacuum → Gas flushing → Vacuum → Sealing
(7) Gas flushing → Vacuum → Gas flushing → Sealing
(8) Vacuum →Gas flushing → Vacuum → Gas flushing → Sealing
This button decides target time or target degree of each process the user wants to get. With each pressing of TIME
button, the turns are changed one by one from VACUUM1, VACUUM2, GAS1, GAS2, and SEALING to COOLING. Then,
for each of them, you can adjust time or vacuum degree by UP and DOWN button.
( If V is set by using VAC / TIME button, the value below VACUUM1and VACUUM2 means vacuum degree )
Increase / Decrease time / vacuum degree for each selected process.
This is the Stop button. If you press the button, the machine comes back to the original state. So, the nozzle moves
backward and the sealing bar moves up.